LAMTEC
German engineering in combustion technology
LAMTEC is a Germany-based manufacturer that develops combustion management systems, flame monitoring devices, flue gas measuring systems and actuators for industrial firing plants.
Its products are used for efficient, safe and low-emission combustion, from single-burner boilers to large power plants.
Why LAMTEC
- Safety-certified components (SIL, EN standards)
- Precise electronic control of the fuel-air ratio
- Fuel savings through O₂ and CO/H₂ measurement
- Systems that scale from a single burner to large plants
- Easy integration via Modbus, PROFIBUS and PROFINET
LAMTEC products
CMS combustion management system
Modular burner and plant control that scales from small industrial burners to large installations
- SIL3 · CE · UL
- ≤ 10 actuators
- Modbus TCP
BT300 burner control unit
Compact burner-mounted unit that pairs fuel-air ratio control with a burner sequencer
- ≤ 3 actuators
- Burner-mounted
- SIL3 (BT331, BT341)
MCC-BC400 burner sequencer
Configurable burner sequencer for gas-fired, oil-fired and dual-fuel burners
- SIL3 · CE · UL
- Gas · Oil · Dual fuel
- Modbus TCP
BC300 gas burner sequencer
Burner sequencer for industrial gas burners in thermal process plants, approved for intermittent and continuous operation
- SIL3 · CE
- Intermittent · Continuous
- High-temperature operation > 750 °C
ETAMATIC compact burner control unit
Compact unit that combines electronic fuel-air ratio control and a burner sequencer in one housing
- ≤ 4 actuators
- SIL3 · CE
- Gas · Oil
ETAMATIC OEM burner control unit
Control unit without a front panel, designed to be mounted on the burner as a standard part of monoblock burners
- ≤ 4 actuators
- SIL3 · CE
- Burner-mounted
FMS combustion management system
System that merges an electronic burner sequencer with fuel-air ratio control for up to 5 actuators in one device
- ≤ 5 actuators
- SIL3 · CE
- CO/O₂ control
VMS fuel-air ratio control system
Fail-safe electronic fuel-air ratio control for up to 5 actuators with integrated CO/O₂ control
- ≤ 5 actuators
- SIL3 · CE
- CO/O₂ control
O₂ trim control
Combustion optimisation software that corrects the fuel-air ratio from the residual oxygen measured in the flue gas
- Software module
- LT1 · LT2 · LT3 · LT3-F · NT1
CO/H₂ trim control
Adaptive combustion control that optimises the fuel-air ratio on its own by approaching the emission edge
- Software module
- LT3-F + KS1D
TPS 4.5 Nm actuator
Compact 4.5 Nm actuator for use with CMS, ETAMATIC, FMS and VMS
- 4.5 Nm
- IP65
- CMS · ETAMATIC · FMS · VMS
TPS 6–40 Nm actuator
6, 20 and 40 Nm electronic actuators for dampers and valves
- 6 / 20 / 40 Nm
- IP65
- Ex zone 2 (optional)
TPS 60 Nm actuator
60 Nm actuator with electric manual override for use with CMS, ETAMATIC, FMS and VMS
- 60 Nm
- IP65
- CMS · ETAMATIC · FMS · VMS
TPS 100 and 200 Nm actuator
100 and 200 Nm actuators with electric manual override and IP65 protection
- 100 / 200 Nm
- IP65
- CMS (AEC-TPS)
662RX 6 and 20 Nm actuator
6 and 20 Nm actuators with three-point step or optional 4…20 mA control, TÜV-approved for ETAMATIC, FMS and VMS
- 6 / 20 Nm
- IP65
- ETAMATIC · FMS · VMS
662RX 30, 40 and 50 Nm actuator
30, 40 and 50 Nm actuators with three-point step or optional 4…20 mA control, TÜV-approved for ETAMATIC, FMS and VMS
- 30 / 40 / 50 Nm
- IP65
- ETAMATIC · FMS · VMS
662RX 90, 140 and 180 Nm actuator
90, 140 and 180 Nm actuators with three-point step or optional 4…20 mA control, TÜV-approved for ETAMATIC, FMS and VMS
- 90 / 140 / 180 Nm
- IP65
- ETAMATIC · FMS · VMS
Actuator for Ex zone 1
ATEX/IECEx-certified actuator for Ex zone 1 with five torque options from 6 to 50 Nm, for ETAMATIC, FMS and VMS
- Ex zone 1 · ATEX · IECEx
- 6 / 20 / 30 / 40 / 50 Nm
- IP65
SVL linear gas control valve
Threaded DN08…DN50 control valve for gas and cold air flow, Rp or NPT connection, linear characteristic from DN08 to DN40
- DN08 … DN50
- ≤ 500 mbar
- -20 … +60 °C
SVG gas damper
DVGW-tested butterfly damper in aluminium or stainless steel for controlling gas flow, DN40…DN150
- DN40 … DN150
- ≤ 500 mbar
- DVGW
SVA / SVH / SVHT flue gas and air damper
DN40…DN200 flue gas and air dampers: aluminium up to 100 °C, cast iron up to 450 °C, stainless steel up to 650 °C
- Flue gas / air
- DN40 … DN200
- ≤ 100 / ≤ 450 / ≤ 650 °C
Air flow measurement grid
Project-specific grid that measures gas flow rate and velocity in ducts with low pressure loss
- 2 … 40 m/s
- -20 … +400 °C
- Stainless steel
F120I flame monitoring device
SIL3 DIN-rail device that supervises gas flames by ionisation, using a 390 V auxiliary voltage
- SIL3
- Ionisation · 390 V
- Intermittent · Continuous
F130I flame monitoring device
SIL3 flame monitor with ionisation, UV tube and LDR inputs, approved for continuous operation with ionisation
- SIL3
- Ionisation · UV · LDR
- Continuous (ionisation only)
F152 flame monitoring device
SIL3 evaluation unit for optical flame monitoring with an FFS07 or FFS08 UV/IR sensor, approved for continuous operation
- SIL3
- UV · IR (FFS07 / FFS08)
- Continuous
F200K compact flame scanner
SIL3 compact flame scanner with a UV or IR sensor and evaluation electronics in one housing, for continuous operation
- SIL3 · IP67
- UV-2 · IR-1 · IR-2
- 24 V DC
F200K Ex explosion-protected compact flame scanner
SIL3 compact flame scanner for hazardous areas: F200K Ex for Ex zones 1 and 21, F200K Ex-II for zones 2 and 22
- Ex 1/21 · Ex 2/22
- SIL3 · Continuous
- UV-2 · IR-1
F300K compact flame scanner
SIL3 compact flame scanner with a UV, IR or dual UV/IR sensor and three operating modes; standard version for Ex zone 2
- SIL3 · Ex zone 2
- UV · IR · UVIR-1
- -40 … +85 °C
F350 and FFS30 flame monitoring system
SIL3 flame monitoring system consisting of the F350 evaluation unit and an FFS30 UV, IR or dual UV/IR flame sensor
- SIL3 · Continuous
- UV · IR · UVIR-1
- FFS30 UV-4/UVIR-1: Ex 1/21 · Ex 2/22
FFS07 and FFS08 flame sensors
UV/IR flame sensors that work only with F152, CMS, ETAMATIC, ETAMATIC OEM or MCC-BC400; FFS07 also comes in Ex versions
- UV · IR
- SIL3 (F152) · Continuous
- FFS07: Ex 1/21 · Ex 2/22
GFI pilot burner
Gas-fired pilot burner with flame monitoring for reliable main burner ignition in industrial furnaces and firing systems
- 27 … 700 kW
- SIL3 · IP65
- ATEX · IECEx (GFI48, GFI70, GFI89)
HEI high-energy igniter
Igniter that lights the main fuel directly by spark, without pilot fuel, with control unit and lance in a single unit
- 18 J (HEI500) · 10 J (HEI600)
- NFPA 8501/8502 Class 3 Special
- Ex zone 2 (optional)
LT1 measuring system
Modular system with the LS1 probe for O₂ measurement in flue gas; automatic calibration with ambient air and SIL1
- O₂ 0 … 21 %
- SIL1
- LS1 HT: ≤ 1400 °C
LT2 measuring system
Versatile, modular system for O₂ and CO/H₂ measurement in flue gas with LS2 and KS1D probes
- O₂ + COe
- LS2/KS1D: ECO · BF · KAF · Ex
- SIL1 (KS1D, special configuration)
LT3 measuring system
Compact, robust measurement of O₂ and CO/H₂ in flue gas
- O₂ + COe
- SIL1 / SIL2
LT3-Ex explosion-protected measuring system
O₂ and COe measurement in flue gas for Ex zones 1 and 2 with LS2-Ex and KS1D-Ex probes
- O₂ + COe
- Ex zones 1 and 2
- SIL1 · SIL2 (2 × LT3-Ex)
LT3-F measuring system
O₂ and COe measurement with KS1D probes for CO/H₂ trim control with LAMTEC burner controls
- O₂ + COe
- KS1D ECO · KS1D-BF
LT4 measuring system
O₂ and COe measurement with KS1D probes; safe digital and analogue outputs, optional function and drift test with FTU
- O₂ + COe
- KS1D ECO · KS1D-BF · KS1D-Ex
NT1 NOx measuring system
Direct O₂ and NOx measurement in flue gas with KS2DNOx probes; up to 4 probes depending on version, touch panel
- O₂ + NOx
- 1 / 2 / 4 × KS2DNOx
- Touch panel
Let's choose the right product for your project together
Tell us about your plant and what you need, and our engineers will recommend the right solution.